Build you a customized heat Today!!!
How to build a heat with out FFL or stores
1. Think about the type of heat you want to build, and the color and design.
2. Order everything, you will need to complete the build. Everything you will need is on this page.
3. Put the heat together, If you don't know how to put together then just join my Patreon and I will show you how.
4. Buy some oil, Oil it up like diddy and go test it out at a range. All Ghost heats need a break in period of around 100-300 rounds.
5. Fix any flaws like jamming, if you have any trouble with jams, just contact Brando and he will show you how to unjam it.
Extra Tip: - If your trigger is not resetting the hammer when you cock it back that means there is too much space in-between the slide and frame so to fix that you just have to hammer in the rails a little.
what you will need
1. complete slide (You can buy a stripped upper to customize it how you want but if you do then you will also have to buy a upper parts kit too. I would recommend a complete upper for beginner builders)
2. Frame (Get a stripped frame or a 3d printed one and build it if you cannot get a frame out the store)
3. Frame lower parts kit (If you do not order a Geisler defense frame, you will need to buy a locking block, rails and find a jig. so, I would recommend using the Geisler frames.)
4. Magazine and bullets (I would recommend Hornady rounds)
5. Hand drill (All you need is a hand drill and a hammer)
6. Attachments (Beams, Grips, RMR cuts, holsters)
websites
Slideshow
Slideshow
Slideshow
Slideshow
Slideshow
Slideshow
Slideshow
After buying all the parts for your costume heat. Join my Patreon to learn how to put everything together.